Energy efficient because it's so reliable

The inverted bucket is the most reliable steam trap operating principle known. The heart of its simple design is a unique leverage system that multiplies the force provided by the bucket to open the valve against pressure.

Since the bucket is open at the bottom, it resists damage from water hammer, and wear points are heavily reinforced for long life. The inverted bucket has only two moving parts-the valve lever assembly and the bucket. That means no fixed points, no complicated linkage. Nothing to stick, bind or clog.

Conserves energy even in the presence of wear

Armstrong inverted bucket steam traps open and close based on the difference in density between condensate and steam-the inverted bucket principle. They open and close gently, minimizing wear. This simple fact means that inverted buckets are subject to less wear than some other types of traps.

In fact, as an Armstrong inverted bucket trap wears, its tight seal actually improves. The valve and seat of the Armstrong trap provide essentially line contact-resulting in a tight seal because the entire closing force is concentrated on one narrow seating ring.

An Armstrong inverted bucket steam trap continues to operate efficiently with use. Gradual wear slightly increases the diameter of the seat and alters the shape and diameter of the valve. But, as this occurs, a tight seal is still preserved-the ball merely seats itself more deeply.

Corrosion-resistant parts

The stainless steel valve and seat of the Armstrong inverted bucket steam trap are individually ground and lapped together in matched sets. All other working parts are wear- and corrosion-resistant stainless steel.

Venting of air and CO2

The Armstrong inverted bucket provides continuous automatic air and CO2 venting with no cooling lag or threat of air binding.

Operation against back pressure

The Armstrong inverted bucket has excellent performance against back pressure. It has no adverse effect on inverted bucket operation other than to reduce its capacity by the low differential. The bucket simply requires less force to pull the valve open and cycle the trap.

Freedom from dirt problems

Armstrong designed its inverted bucket to be virtually free of dirt problems. The valve and seat are at the top of the trap, far away from the larger particles of dirt, which fall to the bottom. Here, the up-and-down action of the bucket pulverizes them.

Since the valve of an inverted bucket is either fully closed or open, dirt particles pass freely. And the swift flow of condensate from under the bucket's edge creates a unique self-scrubbing action that sweeps dirt out of the trap. To review a specific inverted bucket steam trap, select a series and go to the menu.

Request a Quote
Request a Steam System Assessment

Up to 20 000 lb/hr / 9 072 kg/hr
Up to 4 400 lb/hr / 2 000 kg/hr
Up to 20 000 lb/hr / 9 072 kg/hr
Up to 4 400 lb/hr w/Integral Strainer
Up to 1 058 lb/hr / 480 kg/hr
Up to 20 000 lb/hr / 9 072 kg/hr
Up to 1 300 lb/hr / 590 kg/hr
970 Series Inverted Bucket Steam Traps
Débits jusqu'à 2000 kg/hr
Up to 20 000 lb/hr / 9 072 kg/hr
Up to 5 150 lb/hr / 2 336 kg/hr
Up to 6 500 lb/hr / 2 948 kg/hr
Up to 4 400 lb/hr / 2 000 kg/hr
Up to 1 802 lb/hr / 817 kg/hr
Up to 1 300 lb/hr / 590 kg/hr
Up to 1 300 lb/hr / 590 kg/hr