Flo-Rite-Temp Model 665PP-P

Flo-Rite-Temp Model 665 PP-P Instantaneous Steam/Water Heater pre-piped parallel/redundant single temperature packaged assembly designed for a Non-Recirculating Hot Water System.

Flo-Rite-Temp 665 Pre-Piped (P-P) Parallel (P) Single Temperature Systems are fully assembled and include the following installation components:

Steam Trap
Air Vent
Thermometers
CIP Connection Port
Flow Control/Isolation Valves

Ideal for both new construction and retrofit installation within an existing building infrastructure. Flo-Rite-Temp 665PP-P is designed to fit through a standard 32" doorway.

Each Flo-Rite-Temp Instantaneous Steam/Water Heater features a 6" diameter shell and a non-helical straight internal tube bundle with end cap.

Each Flo-Rite-Temp Instantaneous Steam/Water Heater has 65/130 GPM capacity with 15PSI steam at a 100°F temperature rise.

Each Flo-Rite-Temp Instantaneous Steam/Water Heater features a unique feed forward design which features a differential pressure diaphragm actuated mixing unit integral to a shell and tube heat exchanger.

The Flo-Rite-Temp mixing unit(s) manages the water flow through the heat exchanger based upon downstream hot water demand and eliminates the requirement for a modulating steam control valve.

Operating on constant low pressure (2-15PSI) steam, the Flo-Rite-Temp Model 665PP-P mixing unit supplies water to the heat exchanger where it is overheated and then returned to the mixing unit for proportional re-mixing with cold water to a pre-set outlet temperature.

For submittal drawing refer to:
Model 415PP-P	Single Wall	S5457
Model 415DWPP-P	Double Wall	S5503
Model 535PP-P	Single Wall	S5458
Model 535DWPP-P	Double Wall	S5504
Model 665PP-P	Single Wall	S5459
Model 665DWPP-P	Double Wall	S5505
Model 8120PP-P	Single Wall	S5460
Model 8120DWPP-P	Double Wall	S5506

Flo-Rite-Temp Instantaneous Steam/Water Heater
Model	Entering Water Temperature	Outlet Temperature
Model	Entering Water Temperature	120	130	140	160	180
415PP-P	40	20	18	16	12	7
	50	20	20	17	13	7
	60	-	20	19	14	7
535PP-P	40	45	39	34	26	16
	50	45	43	37	28	17
	60	-	45	40	30	18
665PP-P	40	80	73	63	48	32
	50	80	80	68	51	33
	60	-	80	75	55	35
8120PP-P	40	145	145	120	95	59
	50	145	145	134	102	72
	60	-	145	145	115	90

Note: All flow rates in gallons per minute and using 15 PSIG steam.

Flo-Rite-Temp Model 665PP-P

下载中心