Flo-Rite-Temp Model 415PP-PTW-EMC1

Flo-Rite-Temp Model 415PP-PTW-EMC1 Instantaneous Steam/Water Heater pre-piped parallel/redundant tempered water packaged assembly designed for Recirculating Hot Water Systems.

Flo-Rite-Temp Model 415 Pre-Piped (P-P) Parallel (P) Tempered Water (TW) Electronic Mixing Center (EMC1) Systems are fully assembled and include the following installation components:

Steam Trap
Air Vent
Thermometers
CIP Connection Port
Flow Control/Isolation Valves
Electronic Mixing Center "The Brain" (EMC1)

Ideal for both new construction and retrofit installation within an existing building infrastructure. Flo-Rite-Temp 415PP-PTW-EMC1 is designed to fit through a standard 32" doorway.

Each Flo-Rite-Temp Model 415PP-PTW-EMC1 Instantaneous Steam/Water Heater features a 4" diameter shell.

Each Flo-Rite-Temp Model 415PP-PTW-EMC1 has 15/30 GPM capacity with 15PSI steam at a 100°F temperature rise.

Each Flo-Rite-Temp Model 415PP-PTW-EMC1 features a unique feed forward design which features a differential pressure diaphragm actuated mixing unit integral to a shell and tube heat exchanger.

The Flo-Rite-Temp Model 415PP-PTW-EMC1 mixing unit manages the water flow through the heat exchanger based upon downstream hot water demand and eliminates the requirement for a modulating steam control valve.

Operating on constant low pressure (2-15PSI) steam, the Flo-Rite-Temp Model 415PP-PTW-EMC1 mixing unit supplies water to the heat exchanger where it is overheated and then returned to the mixing unit for proportional re-mixing with cold water to a pre-set outlet temperature.

The Brain Model EMC1 integrates with the Flo-Rite-Temp Model 415PP-PTW-EMC1 Water Heater to offer a two temperature system option, +/-2°F water temperature control and BAS/LAN connectivity.

For submittal drawing refer to:
Model 415PP-PTW-EMC1	Single Wall	S5480
Model 415DWPP-PTW-EMC1	Double Wall	S5526
Model 535PP-PTW-DMC1	Single Wall	S5481
Model 535DWPP-PTW-DMC1	Double Wall	S5527
Model 665PP-PTW-DMC1	Single Wall	S5482
Model 665DWPP-PTW-DMC1	Double Wall	S5528
Model 8120PP-PTW-DMC1	Single Wall	S5483
Model 8120DWPP-PTW-DMC1	Double Wall	S5529

Flo-Rite-Temp Instantaneous Steam/Water Heater
Model	Entering Water Temperature	Outlet Temperature
Model	Entering Water Temperature	120	130	140	160	180
415PP-PTW-EMC1	40	20	18	16	12	7
	50	20	20	17	13	7
	60	-	20	19	14	7
535PP-PTW-DMC1	40	45	39	34	26	16
	50	45	43	37	28	17
	60	-	45	40	30	18
665PP-PTW-DMC1	40	80	73	63	48	32
	50	80	80	68	51	33
	60	-	80	75	55	35
8120PP-PTW-DMC1	40	145	145	120	95	59
	50	145	145	134	102	72
	60	-	145	145	115	90

Note: All flow rates in gallons per minute and using 15 PSIG steam.

Note: If a 8120PP-PTW-DMC1 is selected for parallel operation, a second DRV 80 is recommended to increase the flow rate.

Flo-Rite-Temp Model 415PP-PTW-EMC1

Download Center