Did you know: The payback could be as quick as 6 months when you use an Armstrong Flo-Direct water heater to replace steam generation.

Flo-Rite-Temp Model 665PP-P

Flo-Rite-Temp Model 665PP-P

Flo-Rite-Temp Model 665 PP-P Instantaneous Steam/Water Heater pre-piped parallel/redundant single temperature packaged assembly designed for a Non-Recirculating Hot Water System.

Flo-Rite-Temp 665 Pre-Piped (P-P) Parallel (P) Single Temperature Systems are fully assembled and include the following installation components:

  • Steam Trap
  • Air Vent
  • Thermometers
  • CIP Connection Port
  • Flow Control/Isolation Valves

Ideal for both new construction and retrofit installation within an existing building infrastructure. Flo-Rite-Temp 665PP-P is designed to fit through a standard 32" doorway.

Each Flo-Rite-Temp Instantaneous Steam/Water Heater features a 6" diameter shell and a non-helical straight internal tube bundle with end cap.

Each Flo-Rite-Temp Instantaneous Steam/Water Heater has 65/130 GPM capacity with 15PSI steam at a 100°F temperature rise.

Each Flo-Rite-Temp Instantaneous Steam/Water Heater features a unique feed forward design which features a differential pressure diaphragm actuated mixing unit integral to a shell and tube heat exchanger.

The Flo-Rite-Temp mixing unit(s) manages the water flow through the heat exchanger based upon downstream hot water demand and eliminates the requirement for a modulating steam control valve.

Operating on constant low pressure (2-15PSI) steam, the Flo-Rite-Temp Model 665PP-P mixing unit supplies water to the heat exchanger where it is overheated and then returned to the mixing unit for proportional re-mixing with cold water to a pre-set outlet temperature.

To learn more, go to the menu above.

 

 For submittal drawing refer to:
 Model 415PP-P   Single Wall   S5457
 Model 415DWPP-P   Double Wall   S5503
 Model 535PP-P   Single Wall   S5458
 Model 535DWPP-P   Double Wall   S5504
 Model 665PP-P   Single Wall   S5459
 Model 665DWPP-P   Double Wall   S5505
 Model 8120PP-P   Single Wall   S5460
 Model 8120DWPP-P   Double Wall   S5506

 

 Flo-Rite-Temp Instantaneous Steam/Water Heater
Model Entering Water Temperature Outlet Temperature
120 130 140 160 180
415PP-P 40 20 18 16 12 7
50 20 20 17 13 7
60 - 20 19 14 7
535PP-P 40 45 39 34 26 16
50 45 43 37 28 17
60 - 45 40 30 18
665PP-P 40 80 73 63 48 32
50 80 80 68 51 33
60 - 80 75 55 35
8120PP-P 40 145 145 120 95 59
50 145 145 134 102 72
60 - 145 145 115 90

Note: All flow rates in gallons per minute and using 15 PSIG steam.

 

 

Armstrong wants to be your solutions provider: