Armstrong Unit and Door Heaters

Unit and Door Heaters

Many of the best reasons to insist on Armstrong unit heaters are ones you never even see. Components like motors, bearings, tubes, enclosures and fins are heavy-duty, to ensure lasting performance.

Armstrong’s options for fin material, pitch, height and type, for example, help explain why our heating cores last much longer and perform with greater efficiency than competitive units. These factors all have a bearing on heat transfer. Knowing how to balance these and other factors is the key to a cost-effective solution. That knowledge is perhaps the most important of Armstrong’s many hidden benefits.

Longer life in the harshest industrial environments

When it comes to long life under tough industrial conditions, Armstrong is all you need to know about unit heaters and door heaters. Even in the most severe environments, where coil leaks and corrosion are costly problems, Armstrong coils maintain high efficiency and output.

Armstrong: Why and how

The ability to maintain heat transfer efficiency and resist corrosion—both internally and externally—is why Armstrong coils are uniquely dependable. How we construct them is your assurance of lasting performance, even in severe operating environments. Consider these measurable benefits at work in your facility:

Heavy-duty enclosures. Fabricated from 14-gauge steel for protection and durability.

Corrosion-resistant heating cores. Cores are fabricated in a full range of materials, including steel, stainless steel and copper. Special coatings may be applied to increase resistance to external corrosion. Cores are of all-welded construction for durability and ease of repair. Cores are compatible with steam or liquid, and they can be used for steam, hot water or glycol heating mediums.

Standard NEMA frame TEFC ball bearing motors. Supplied in all sizes, these heavy-duty motors are totally enclosed to lock out dirt. Quick access to the motor permits easy replacement.

Thick fins and tubes. The coils are constructed of high-strength, corrosion-resistant materials. The fins are available in a wide variety of thicknesses and pitches to withstand high-pressure cleaning without damage or distortion.

Customizing to your needs. Fans range in size from 10" to 48", and the wide selection of component material means long, trouble-free service life.

Fin types

  • Keyfin. Keyfin coils are manufactured by forming a helical groove in the tube surface and winding the fin into the groove. The displaced metal from the groove is then peened against the fin. This means a tight fit between the fin and the tube, ensuring efficient operation over wide temperature ranges. The keyfin is the superior design for dissimilar fin tube materials.
  • L Fin. The L fin has a “foot” at its base and is tension wound on knurled tube material. The L-shaped base provides a large contact area between the tube and the fin, ensuring effective, long-lasting heat transfer. The L fin is recommended when tubes and fins are of the same material.

Request a quote:





Resource Library
Resource Library
Contact Us
Contact Us
Find a Rep
Find a Rep
Request a Quote
Request a Quote
System Assessment
System Assessment
Calculators
Calculators