MT Series Thermostatic Wafer Steam Trap

Stainless steel or carbon steel

For pressures to 350 psig (24 bar) . . .
Cold water start-up capacities to 1,000 lb/hr (453 kg/hr)

The thermostatic wafer steam trap, the Series MT-2, is sized precisely to handle the extremely low condensate load found in most instrument steam tracer lines. The MT thermostatic wafer traps are designed to last longer than other oversized, all-purpose thermostatic and thermodynamic steam traps.

A water seal prevents loss of steam through the orifice of the MT Series.

The MT Series traps adjust automatically to flow rates, including large start-up loads, at all pressures within their range.