Standard | Armstrong International, Inc.®

Hot & Cold Water Hose Stations – Standard

Armstrong hot and cold water hose stations replace the basic Mixing Y with a Rada® 320 thermostatic mixing valve as the primary water temperature controller. With the Rada 320 you can:

Change outlet water temperature from full cold to the field-adjustable maximum limit stop in a single handle turn
Set and lock to a single temperature and maintain outlet temperatures +/-2˚F (1˚C) in the event of inlet pressure and/or temperature fluctuation or change
Protect the operator a thermal-shutdown feature if the cold water inlet supply fails

IMPORTANT NOTE: Thermostatic products used by our competitors for this application cannot provide a temperature range from full cold to the field-adjustable maximum limit stop. Nor can they access temperatures within 5°F (2°C) of either inlet supply temperature.

Various hose lengths, spray nozzles and hose reels are available as options for Armstrong hot and cold water hose stations.

The Armstrong Hot & Cold Hose Stations – Standard series is supplied fully assembled and pressure tested in the following configurations. Go to the menu bar above for specific detail on each model:

Model 3031

Rada 320 Thermostatic Mixing Valve supplied with integral risers for simultaneous on/off control of both inlet supplies. The unit is installed on a stainless steel wall mounting plate.

Model 3032

Rada 320 Thermostatic Mixing Valve supplied with integral risers for simultaneous on/off control of both inlet supplies. The unit is installed on a stainless steel hose rack that is suitable for wall or column installation.

Model 3033

Model 3033 is also supplied with 25 feet (7.6 m) of white washdown hose with “live” swivel adaptors and a Rubber-cushioned 10 gpm (37.8 lpm)-rated water saver spray nozzle with nozzle hook.