Water Temperature Control—Recirculation Systems—Digital

BrainScan™ is an optionally selected control module. BrainScan connects to the BrainScan port on DRV80 and enables a direct onward connection to Building Automation Systems which utilize ModBus, Bacnet™ and LonWorks™ protocols* with an Ethernet port for web access.

BrainScan can receive and communicate the following inputs from The Brain - Model DRV80:

• Set Point
• Inlet/Outlet Temperature
• Over Temperature Alert

BrainScan can receive and communicate the following self-diagnostic error messages from The Brain - Model DRV80:

• Over Temperature Error
• PCB Error
• Thermister Error
• Motor Error/Safe Mode
• Battery Error

BrainScan is available in two (2) different configuration packages as described below:

BrainScan™ 1

Includes remote hot water supply, cold/recirculation water supply and blended water outlet temperature readings.  Also gives the ability to remotely change blended water outlet temperature setpoint.  Included with both BrainScan™ options is the valve/system graphic.

BrainScan™ 2 - only available with Digital Mixing Centers

Provided as BrainScan™ 1 with hot water supply, cold water supply and blended water outlet pressure transmitters.

* Building Automation System “mapping” and related interface procedures required by onsite BAS technical support.