Did you know: Through storytelling, Armstrong team members clearly understand what the company believes in and what needs to be done to keep the company successful.

TTF Series Stainless Steel Thermostatic Air Vents

TTF Series Stainless Steel Thermostatic Air Vents

For pressures to 300 psig (20 bar) . . .
Capacities to 104 scfm (177 m3h)

Armstrong offers thermostatic air vents for positive venting of air and other non-condensable gases from steam in chamber-type heat-transfer equipment. Typical applications include jacketed kettles, retorts, vulcanizers, jacketed sterilizers or other contained equipment where air could accumulate in remote areas of the steam chamber and reduce heat-transfer capacity. These vents are balanced pressure air vents that respond to the pressure-temperature curve of steam. Air is automatically vented at slightly below steam temperature throughout the entire operating pressure range.

  • Suitable for pressures from 0 – 300 psig
  • All 304-L stainless steel bodies—sealed, tamperproof
  • Balanced-pressure thermostatic element vents air at slightly below steam temperature over the entire pressure range—no adjustments required
  • Dependable, proven phosphor-bronze bellows caged in stainless steelwith bronze valve and stainless steel seatAvailable in straight-thru or right-angle connections

Armstrong thermostatic air vents should be installed at the highest point on a steam chamber, with the air vent located above the chamber. This will minimize the possibility of any liquid carryover, and air can be vented at atmosphere without a drain line.

Armstrong wants to be your solutions provider: